Summary for Parameter Immunoassay Control Set 1010 for Corticosterone
INTENDED USE & DESCRIPTION
For use as quantitative controls for the determination of cytokine concentrations in biological fluids. Concentrations have been assigned using R&D Systems’ Parameter® kits. Controls are prepared in diluted porcine serum with preservatives. They contain recombinant human cytokines at low, medium and high concentrations. Controls are supplied lyophilized.
STORAGE & STABILITY
Unreconstituted Controls should be stored at 2-8 °C and are stable for at least 6 months from date of receipt. Depending on the analyte of interest, reconstituted controls may be stable when stored at
REAGENT PREPARATION
Reconstitute each vial with the volume of deionized or distilled water indicated on the product datasheet.
PROCEDURE & EXPECTED VALUES
Controls should be assayed in the same manner as unknown specimens.
The acceptable ranges for the analytes in these controls are printed on the product datasheet. Due to possible variations in techniques and methodologies, it is recommended that each laboratory determine its own target range. Laboratories using other test systems should establish their own acceptable ranges as these assays may produce different values.
TECHNICAL HINTS & LIMITATIONS OF THE PROCEDURE
The ranges were determined using R&D Systems’ Parameter kits. If expected values are not obtained, verify that the lot numbers on the vials correspond with the lot numbers listed above and the correct volume of deionized or distilled water was used for reconstitution of the controls.
The results obtained with these controls depend upon several factors associated with methods and instrumentation. Test systems other than those supplied by R&D Systems may result in values that differ from those printed on this product datasheet.
Corticosterone, also known as Kendall's compound B and Reichstein substance B, is a glucocorticoid secreted by the adrenal gland cortex. It is produced in response to adrenal cortex stimulation by adrenocorticotropic hormone (ACTH) and is the precursor of aldosterone. Stress increases corticosteroid production. Corticosterone level is measured as an indicator of stress in patients with dietary restrictions, long-term memory impairment, and burn injuries.
Product Specifications for Parameter Immunoassay Control Set 1010 for Corticosterone
Species
Multi-Species
Applications
Control
Source
N/A
Preparation & Storage
Shipping Conditions
The product is shipped with polar packs. Upon receipt, store it immediately at the temperature recommended below.
Storage
Store the unopened product at 2 - 8 °C. Do not use past expiration date.
Bio-Techne uses cookies to provide you with a great website experience. By continuing to use this website you acknowledge this and agree to our cookie policy. Learn more.