Breadcrumb
- Home
- Products
- Pluripotent Stem Cells
- Pluripotent Stem Cells Stem Cell Products
- Human Pluripotent Stem Cell Marker Antibody Panel (SC008)
Human Pluripotent Stem Cell Marker Antibody Panel
R&D Systems, part of Bio-Techne | Catalog # SC008
Key Product Details
Summary for Human Pluripotent Stem Cell Marker Antibody Panel
Five antibodies to verify human stem cell pluripotency:
Key Benefits
- A cost-effective selection of pluripotency marker antibodies
- Verifies the pluripotency of your starting stem cell population
- Increases confidence in pluripotency status by using 5 markers
Why Use Molecular Markers to Verify Human Stem Cell Pluripotency?
Stem cell pluripotency can be characterized functionally by their ability to differentiate into cells of the three vertebrate germ layers. However, functional verification is time-consuming, expensive, and is less conducive to routine stem cell culture screening or high-throughput analysis of stem cell pluripotency.
In addition to the abili ty to give rise to all cell types, a number of molecular markers have been identified to characterize the pluripotent status of stem cells. For example, human pluripotent stem cells express the cell surface proteins SSEA-4 and Alkaline Phosphatase and the transcription factors Oct-3/4 and Nanog.
Analyzing human stem pluripotency using marker antibodies:
- Promotes the identification and expansion of high quality, undifferentiated stem cell populations.
- Provides increased confidence in pluripotent status through the use of multiple markers.
- Defines the starting stem cell population to reduce experimental variation.
- Is a straightforward, cost-effective way to verify stem cell pluripotency.
This kit contains the following antibodies to verify human stem cell pluripotency:
Positive Markers
- Mouse Anti-Human Alkaline Phosphatase Monoclonal Antibody
- Goat Anti-Human Nanog Antigen-affinity Purified Polyclonal Antibody
- Goat Anti-Human Oct-3/4 Antigen-affinity Purified Polyclonal Antibody
- Mouse Anti-Human SSEA-4 Monoclonal Antibody
Negative Marker
- Mouse Anti-Human SSEA-1 Monoclonal Antibody
Each antibody is supplied as 25 µg; if reconstituted in 250 µL, this provides reagents sufficient for processing the equivalent of eight 300 µL immunocytochemistry samples or 25 flow cytometry samples at the recommended concentrations.
Stability and Storage
Reagents are stable for 12 months from date of receipt when stored in the dark at 2 °C to 8 °C.
Embryonic stem (ES) cells are pluripotent stem cells derived from the inner cell mass of pre-implantation embryos. Induced pluripotent stem (iPS) cells can be generated by somatic cell reprogramming following the exogenous expression of specific transcription factors (Oct-3/4, KLF4, SOX2, and c-Myc). These cell types are capable of unlimited, undifferentiated proliferation in vitro and still maintain the capacity to differentiate into a wide variety of somatic cells. In this capacity, pluripotent stem cells have widespread clinical potential for the treatments of heart disease, diabetes, spinal cord injury, and a variety of neurodegenerative disorders.
R&D Systems offers a wide range of products to support pluripotent stem cell culture and differentiation. Mouse embryonic fibroblasts may be used to maintain and expand pluripotent stem cells in an undifferentiated state. We also offer defined culture media, which are specifically optimized for use with human or rodent pluripotent stem cells. In addition, R&D Systems offers a variety of products to assess differentiation status and identify specific stem cell types of interest, including panels of marker antibodies, primer pairs, multi-color flow cytometry kits, and specialized verification kits.
Species | Human |
Source | N/A |
|
Expression of Pluripotency Markers in Human Embryonic Stem Cells. Pluripotency marker expression was detected in immersion-fixed BG01V human embryonic stem cells using antibodies supplied in the Human Pluripotent Stem Cell Marker Antibody Panel (Catalog # SC008). Pluripotency marker expression was analyzed by dual immunofluorescence with the indicated primary antibodies supplied in the panel. The cells were stained using Catalog # NorthernLights™ (NL)493- and NL557-conjugated Secondary Antibodies (green and red, respectively). Where indicated, the nuclei were counterstained with DAPI (blue). View our protocol for Fluorescent ICC Staining of Stem Cells on Coverslips. |
|
Detection of Alkaline Phosphatase and SSEA-4 in Human Embryonic Stem Cells. Human embryonic stem cells were stained with pluripotency marker antibodies provided in the Human Pluripotent Stem Cell Marker Panel (Catalog # SC008).A.The cells were labeled with a Mouse Anti-Human Alkaline Phosphatase Monoclonal Antibody (filled histogram) or a Mouse IgG1Isotype Control Antibody (Catalog # MAB002; open histogram).B.The cells were also labeled with a Mouse Anti-Human SSEA-4 Monoclonal Antibody (filled histogram) or a Mouse IgG3Isotype Control Antibody (Catalog # MAB007; open histogram). The cells were stained using a PE-conjugated Goat Anti-Mouse Secondary Antibody (Catalog # F0102B). |
Preparation & Storage
Shipping Conditions | The product is shipped at ambient temperature. Upon receipt, store it immediately at the temperature recommended below. |
Storage | Store the unopened product at 2 - 8° C. Do not use past expiration date. |
Assay Procedure
Refer to the product datasheet for complete product details.
Briefly, human stem cell pluripotency can be verified using marker antibodies and the following procedure:
- The cells are harvested and processed for either immunocytochemistry or flow cytometry
- The cells are incubated with antibody markers of pluripotency
- Pluripotency marker expression is analyzed
Reagents supplied in the Human Pluripotent Stem Cell Marker Antibody Panel Kit (Catalog # SC008):
Positive Markers
- Mouse Anti-Human Alkaline Phosphatase Monoclonal Antibody
- Goat Anti-Human Nanog Antigen-affinity Purified Polyclonal Antibody
- Goat Anti-Human Oct-3/4 Antigen-affinity Purified Polyclonal Antibody
- Mouse Anti-Human SSEA-4 Monoclonal Antibody
Negative Markers
- Mouse Anti-Human SSEA-1 Monoclonal Antibody
Immunocytochemistry
Reagents
- Appropriate stem cell culture substrate (e.g., StemXVivo® Culture Matrix (Catalog # NL001), iMEFs (Catalog # PSC001), etc.)
- Cell culture medium
- Sterile PBS
- 4% paraformaldehyde in PBS
- 1% BSA in PBS
- 0.1% Triton™ X-100, 1% BSA, 10% normal donkey serum in PBS
- Mounting medium (Catalog # CTS011 or equivalent)
- Secondary developing reagents (Catalog # NL001, NL003, NL007, NL009, or equivalent)
Materials
- Human pluripotent stem cells
- Cell culture plate (24-well)
Equipment
- 37 °C, 5% CO2 incubator
- Centrifuge
- Hemocytometer
- Inverted microscope
- Fluorescence microscope
Flow Cytometry
Reagents
- Isotype controls (Catalog # MAB002 and MAB007, or equivalent)
- FACS buffer (2% fetal bovine serum, 0.1% sodium azide in Hank’s buffer)
- Secondary developing reagents
Materials
- Human pluripotent stem cells
- 5 mL tubes
Equipment
- 37 °C, 5% CO2 incubator
- 2 °C to 8 °C refrigerator
- Centrifuge
- Hemocytometer
- Flow cytometer
Triton is a registered trademark of Union Carbide, Inc.
Immunocytochemistry
Pass a suspension of mouse bone marrow cells through a 70 μm nylon strainer to remove clumps and debris.
Remove red blood cells if necessary.
Wash the cells with IMDM/2% FBS by centrifugation at 400 x g for 10 minutes and pool the cells.
Coat coverslips with stem cell subtype-specific substrate.
Plate stem cells.
Culture to desired density/age.
Fix stem cells with 4% paraformaldehyde.
Block with blocking solution.
Incubate with primary antibodies.
Wash with wash buffer.
Incubate with fluorochrome-conjugated secondary antibodies.
Wash with wash buffer.
Incubate with nuclear counterstain.
Mount the coverslip.
Visualize using a fluorescence microscope and appropriate filter sets.
Flow Cytometry
Perform a cell count on harvested cells.
Resuspend the cells in FACS buffer at 1 x 106 cells/mL.
Aliquot 90 µL of the cell suspension into a 5 mL flow cytometry tube.
Add 10 µL of each antibody or isotype control to the cells.
Incubate for 30 minutes at room temperature.
Centrifuge samples at 300 x g for 5 minutes.
Wash the cells three times with FACS buffer.
Resuspend the cells in 200 µL FACS buffer.
Add 10 µL of a fluorochrome-conjugated secondary developing reagent.
Incubate for 30 minutes at room temperature in the dark.
Centrifuge samples at 300 x g for 5 minutes.
Wash the cells three times with FACS buffer.
Resuspend the cells in 200 µL FACS buffer.
Analyze the cells by flow cytometry.
Customer Reviews for Human Pluripotent Stem Cell Marker Antibody Panel
There are currently no reviews for this product. Be the first to review Human Pluripotent Stem Cell Marker Antibody Panel and earn rewards!
Have you used Human Pluripotent Stem Cell Marker Antibody Panel?
Submit a review and receive an Amazon gift card!
$25/€18/£15/$25CAN/¥2500 Yen for a review with an image
$10/€7/£6/$10CAN/¥1110 Yen for a review without an image
Submit a review